Fisher & Paykel Vitera™ Full Face CPAP Mask Fit Pack
Introducing the Fisher & Paykel Vitera™, a full face CPAP mask that features a combination of unique technologies designed to provide you with comfort throughout the night. All three cushion sizes are included with Medium/Large headgear.
Fisher & Paykel Vitera™ Full Face CPAP Mask Fit Pack Overview
The Vitera™ full face CPAP mask by Fisher & Paykel features unique technologies designed to provide you with comfort throughout the night. This mask includes a gentle seal designed to adapt with you as you move.
The Vitera™ headgear incorporates VentiCool™ technology, custom-made breathable fabric designed to help you keep cool and comfortable as you sleep.
- The RollFit™ XT technology allows the seal to roll back & forth on the bridge of your nose, which means:
- The freedom to move as the mask adapts to your different sleeping positions, helping to maintain a comfortable seal and minimize leaking
- Reduced pressure and friction/soreness on the bridge of your nose
- The RollFit™ XT seal covers the nose and mouth, and is designed to operate at a range of pressures from low to high
- The headgear is designed to keep you cool and comfortable:
- Vitera™ headgear features VentiCool™ technology, a custom-made breathable fabric
VentiCool™ is designed to allow heat & moisture to escape through the fabric to help keep you cool and comfortable while you're sleeping
- Vitera™ headgear features VentiCool™ technology, a custom-made breathable fabric
- Stability bar helps to keep the seal secure and in place as you move:
- The Vitera™ features a low-profile stability bar designed to keep the seal in place, helping to minimize mask leaks and supporting a comfortable night’s sleep
-
1 — Vitera™ Mask Frame
-
1 — Vitera™ Headgear
-
3 — Vitera™ Mask Cushions (1 - Small, 1 - Medium, 1 - Large)
If you're looking to purchase the Fisher & Paykel Vitera™ Full Face CPAP Mask components without a prescription, you can find them here.
Breathing Style:
-
Mouth Breathers
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
Additional Considerations:
-
High Pressure Settings
-
Chronic Allergies or Nasal Congestion
Assembling Your Mask:
Refer to the assembly diagrams in these instructions.
- Push the Seal firmly into place on the Frame.
- Push the Swivel onto the Elbow.
- Slide the Forehead Clip onto the top of the Frame.
- Hook the Headgear Clips onto the Frame.
Mask Assembly Tip:
- Check the Swivel is not stuck in the CPAP tube.
Fitting Your Mask:
Remove all packaging before using the mask.
Refer to the fitting images on the inside front cover of this guide.
- Hold the front of the mask with one hand and the Headgear with the other. Ensure that one Headgear Clip is unhooked from the Frame .
- Place the Seal onto your face and guide the Headgear over your head.
- Hook the unattached Headgear Clip onto the Frame .
- Gently tighten the Headgear straps of the Headgear starting with the bottom straps, followed by loosely fitting the blue forehead straps.
Caution: To avoid the risk of suffocation, ensure the headgear is not overtightened. The mask, when fitted correctly, should be able to be pulled away from the mouth without adjusting the headgear straps or disconnecting the Headgear Clips .
Disassembling Your Mask:
Refer to the disassembly diagrams in these instructions.
- Unhook the Headgear Clips from the Frame.
- Slide the Forehead Clip downwards towards the Seal.
- Remove the Seal from the Frame.
- Remove the Swivel from the Elbow.
| Operating Therapy Pressure Range |
| 4 to 30 cm H²O |
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Vitera™: Introduction
Vitera™: Fitting Guide
Vitera™: Cleaning Guide
- CPAP Mask Frame Replacement Frequency: Resupply Every 3 Months
- CPAP Mask Cushions/Pillows Replacement Frequency: Resupply Every 2 Weeks
- CPAP Mask Headgear Replacement Frequency: Resupply Every 6 Months
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Cleaning Guide
Regularly cleaning your CPAP mask parts and components is crucial for avoiding the accumulation of bacteria, debris, oils, and other contaminants. This will help prevent the buildup of germs that may cause skin irritation and other unwanted side effects.
Before following the instructions below, first make sure your CPAP machine is unplugged from the power source, disconnect your mask and air tubing from your CPAP machine, and disassemble your mask components into 3 parts (mask cushions, headgear, and frame):
| Part | Cleaning Frequency | Instructions |
|
Mask Cushions |
Daily |
|
|
Mask Frame |
Weekly |
|
|
Headgear |
Weekly |
|
|
Chinstrap |
Weekly |
|
*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
You can find more useful information regarding CPAP cleaning with this blog:
| Brand | Fisher & Paykel |
|---|---|
| SKU | 20884 |
| Model | VIT1SMLA |
| HCPCS | A7030 |
| UPC | 9420012461629 |
| Prescription Required | Yes |
| Weight | 1.00 lbs |
| Manufacturer's Warranty | 90-day limited manufacturer's warranty |
| Color | Teal Gray |
| FSA/HSA Eligible | Yes |
| Dimensions | Mask Frame: 3 1/2" (L) x 1" (W) x 6 1/4" (H); Elbow: 2 /14" (H), 25mm Inner Diameter (Top), 18mm Inner Diameter (Bottom) |
-
Resvent iBreeze Auto CPAP Machine with Heated HumidifierSpecial Price $340.00 Regular Price $570.00
1 Item Added to Cart
