Fisher & Paykel Zest™ Nasal CPAP Mask without Headgear
The Zest™ Nasal mask features comforrtable cushions and glider™ straps and clips help maintain a seal while being flexible enough to allow you to move freely throughout the night.
Fisher & Paykel Zest™ Nasal CPAP Mask without Headgear Overview
The Fisher & Paykel Zest™ Nasal Mask Frame System is a replacement mask and cushion for the Complete System and includes the acclaimed Variable Thickness Silicone cushion.
When used with the Complete System, this frame system creates a comfortable and effective seal for leak-free therapy. Glider™ straps and clips help maintain a seal while being flexible enough to allow the patient to move freely throughout the night.
The Zest™ Nasal Mask Frame System is for patients who are in need of a mask refresh and need a replacement mask and cushion.
Please note: Headgear is not included with this purchase.
-
Easily remove headgear without adjustments by using the Glider™ Clips one-step headgear removal process
-
Enjoy the Glider™ Strap feature that allows the patient to move throughout the night while maintaining a tight seal for less leakage
-
The Air Diffuser quietly directs air away from the patient and their partner to not disrupt sleep
-
The Foam Cushion FlexiFit™ technology utilizes a foam cushion to contour to the patient's face for a tight, yet soft mask seal
-
Enjoy hassle-free cushion cleaning with the Easy-Clip Silicone Seal. Patients can detach and attach the cushion to and from the frame with one simple step
-
The Hidden Strap Release feature allows the headgear to be easily and quickly removed from the mask forehead support
Please note: Headgear is not included with this purchase.
-
1 — Zest™ Nasal Mask Base (Forehead Rest, Glider™ Strap attached)
-
1 — Zest™ Foam Cushion & Silicone Seal (of selected size)
-
1 — Elbow
-
1 — Swivel
Please note: Headgear is not included with this purchase.
-
Petite Frame, Petite Cushion, Petite Headgear - 400HC559
-
Standard Frame, Standard Cushion, Standard/Plus Headgear - 400HC543
-
Plus Frame, Plus Cushion, Standard/Plus Headgear - 400HC560
Breathing Style:
-
Nasal Breathers
- Mouth Breathers (when paired with a CPAP mask chinstrap)
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
-
Active Sleepers
Additional Considerations:
-
High Pressure Settings
- Glasses Wearers
- Claustrophobia
- Facial Hair
-
Full Field of View for Reading or Watching TV Before Bed
-
Tossing and Turning During Sleep
Fitting Your Mask:
Remove all packaging before using the mask.
Refer to the fitting images of these instructions.
- Remove the plastic cover from the Silicone Seal.
- Holding your mask in one hand, spread the Stretchgear Headgear with your free
hand, just enough to fit comfortably over your head. - Lightly hold the mask against your face, covering the nose, then slowly pull the Headgear over your head.
- Attach the Headgear to the Glider Strap.
- Pull the lower straps as low as possible down the back of your neck. Gently tighten straps to remove slack. Connect to CPAP/Bi-Level machine set at prescribed pressure. If necessary, tighten the lower straps to eliminate any leaks (avoid over-tightening the straps). When you need to remove your mask, unhook the Stretchgear Headgear from the Glider Strap.
Assembling Your Mask:
Refer to the assembly diagrams in these instructions.
- Place the Foam Cushion into the Silicone Seal in the orientation shown in the
diagram. - Starting with the slot at the apex of the Silicone Seal, assemble onto Mask Base. Push firmly together.
- Lay the Stretchgear Headgear flat, with the loop side down. Position the assembled
mask over the Headgear and attach the four straps into the corresponding slots in the
Forehead Rest and the Glider Strap. This can be done without undoing the VELCRO® brand tabs, by sliding the Headgear into the slots.
| Operating Therapy Pressure Range |
| 3 to 25 cmH²O |
CPAPsupplies.com: CPAP Supplies Replacement Schedule
- CPAP Mask Frame Replacement Frequency: Resupply Every 3 Months
- CPAP Mask Cushions/Pillows Replacement Frequency: Resupply Every 2 Weeks
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Cleaning Guide
Regularly cleaning your CPAP mask parts and components is crucial for avoiding the accumulation of bacteria, debris, oils, and other contaminants. This will help prevent the buildup of germs that may cause skin irritation and other unwanted side effects.
Before following the instructions below, first make sure your CPAP machine is unplugged from the power source, disconnect your mask and air tubing from your CPAP machine, and disassemble your mask components into 3 parts (nasal cushions, headgear, and frame):
| Part | Cleaning Frequency | Instructions |
|
Nasal Cushions |
Daily |
|
|
Mask Frame |
Weekly |
|
*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
You can find more useful information regarding CPAP cleaning with this blog:
| Brand | Fisher & Paykel |
|---|---|
| SKU | p_zest_nasal_mask |
| Model | p_zest_nasal_mask |
| UPC | 9420012422170, 9420012421418, |
| Prescription Required | No |
| Weight | 1.00 lbs |
| Manufacturer's Warranty | 90-day limited manufacturer's warranty |
| Color | Clear |
| FSA/HSA Eligible | Yes |
| Included | 400HC560, 400HC559, 400HC543 |
1 Item Added to Cart
