Fisher & Paykel Zest™ Premium Nasal CPAP Mask with Headgear
The Fisher & Paykel Zest™ Complete System is small, quiet, and effortless to fit, offering superb comfort with its innovative design. This complete system features Easy-clip silicone seal, Glider™ strap, Glider™ clips and more, making fitting and sealing hassle-free.
Fisher & Paykel Zest™ Premium Nasal CPAP Mask with Headgear Overview
The Zest™ Nasal Masks combine the Easy Clip Silicone Seal and Advanced Air Diffuser with proven technology that makes Fisher & Paykel Healthcare masks perform so well.
The Zest™ CPAP Mask incorporates a two-part cushion assembly like those found on the popular FlexiFit™ 405 and FlexiFit™ 407 masks. The inner Auto-Contouring Foam Cushion automatically adjusts to a wide range of nasal and facial contours without the need for complicated adjustments. The outer Easy-Clip Silicone Seal allows for a perfect seal and frame alignment to ensure optimal mask performance with each use.
In addition, the Zest™ features a new maintenance-free Air Diffuser that disperses airflow away from the sleeper and sleep partners and minimizes exhaust noise. The breathable elastic headgear is specially designed to maintain a comfortable, firm seal; while Fisher & Paykel's Glider Straps and Clips distribute pressure equally across the face and automatically adjust the mask alignment during sleep.
-
Auto-contouring FlexiFit™ technology adjusts to effectively seal around a range of unique nasal and facial features
-
Patients can move throughout the night and during therapy without worrying about leaks. The anti-leak Glider™ Strap system prevents leaks by adding flexibility to the headgear straps
-
Glider™ Clips allow the patient to remove their headgear in one simple step without having to adjust their headgear
-
Easy-Clip Silicone Seal allows the cushion to be easily removed and attached to the frame for effective cleaning
-
Variable Thickness Silicone (VTS™) provides an especially soft and comfortable cushion seal
-
The patient and their partner enjoy quiet therapy as the Advanced Air Diffuser disperses air away from the bed quietly. This diffuser is maintenance free
-
Stretchgear™ Headgear is a comfortable, elastic headgear that works with the headgear clips to maintain an effective seal
-
1 — Zest™ Nasal Mask Base (Forehead Rest, Glider™ Strap attached)
-
1 — Zest™ Foam Cushion & Silicone Seal (of selected size)
-
1 — Elbow
-
1 — Swivel
-
1 — StretchGear™ Headgear
-
Petite Frame, Petite Cushion, Petite Headgear - 400439
-
Standard Frame, Standard Cushion, Standard/Plus Headgear - 40040
-
Plus Frame, Plus Cushion, Standard/Plus Headgear - 40041
Breathing Style:
-
Nasal Breathers
- Mouth Breathers (when paired with a CPAP mask chinstrap)
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
-
Active Sleepers
Additional Considerations:
-
High Pressure Settings
- Glasses Wearers
- Claustrophobia
- Facial Hair
-
Full Field of View for Reading or Watching TV Before Bed
-
Tossing and Turning During Sleep
Fitting Your Mask:
Remove all packaging before using the mask.
Refer to the fitting images of these instructions.
- Remove the plastic cover from the Silicone Seal.
- Holding your mask in one hand, spread the Stretchgear Headgear with your free
hand, just enough to fit comfortably over your head. - Lightly hold the mask against your face, covering the nose, then slowly pull the Headgear over your head.
- Attach the Headgear to the Glider Strap.
- Pull the lower straps as low as possible down the back of your neck. Gently tighten straps to remove slack. Connect to CPAP/Bi-Level machine set at prescribed pressure. If necessary, tighten the lower straps to eliminate any leaks (avoid over-tightening the straps). When you need to remove your mask, unhook the Stretchgear Headgear from the Glider Strap.
Assembling Your Mask:
Refer to the assembly diagrams in these instructions.
- Place the Foam Cushion into the Silicone Seal in the orientation shown in the
diagram. - Starting with the slot at the apex of the Silicone Seal, assemble onto Mask Base. Push firmly together.
- Lay the Stretchgear Headgear flat, with the loop side down. Position the assembled
mask over the Headgear and attach the four straps into the corresponding slots in the
Forehead Rest and the Glider Strap. This can be done without undoing the VELCRO® brand tabs, by sliding the Headgear into the slots.
| Operating Therapy Pressure Range |
| 3 to 25 cmH²O |
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Zest™: Introduction
Zest™: Fitting Guide
Zest™: Cleaning Guide
- CPAP Mask Frame Replacement Frequency: Resupply Every 3 Months
- CPAP Mask Cushions/Pillows Replacement Frequency: Resupply Every 2 Weeks
- CPAP Mask Headgear Replacement Frequency: Resupply Every 6 Months
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Cleaning Guide
Regularly cleaning your CPAP mask parts and components is crucial for avoiding the accumulation of bacteria, debris, oils, and other contaminants. This will help prevent the buildup of germs that may cause skin irritation and other unwanted side effects.
Before following the instructions below, first make sure your CPAP machine is unplugged from the power source, disconnect your mask and air tubing from your CPAP machine, and disassemble your mask components into 3 parts (nasal cushions, headgear, and frame):
| Part | Cleaning Frequency | Instructions |
|
Nasal Cushions |
Daily |
|
|
Mask Frame |
Weekly |
|
|
Headgear |
Weekly |
|
|
Chinstrap |
Weekly |
|
*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
You can find more useful information regarding CPAP cleaning with this blog:
| Brand | Fisher & Paykel |
|---|---|
| SKU | p_F&P_zest_nasal |
| Model | p_F&P_zest_nasal |
| HCPCS | A7034 |
| UPC | 9420012422385, 9420012421388, 9420012422613 |
| Prescription Required | Yes |
| Weight | 1.00 lbs |
| Manufacturer's Warranty | 90-day limited manufacturer's warranty |
| FSA/HSA Eligible | Yes |
| Included | 400439, 400440, 400441 |
1 Item Added to Cart
