Fisher & Paykel Solo™ Nasal Pillow CPAP Mask
$78.00
The Solo™ Nasal Pillow Mask features the next generation of Fisher & Paykel’s AutoFit™ technology and AirPillow™ cushions that sit comfortably in and around your nose to provide a stable and gentle seal.
Fisher & Paykel Solo™ Nasal Pillow CPAP Mask Overview
The Solo™ Nasal Pillow Mask combines Fisher & Paykel’s next generation of AirPillow™ nasal pillow cushions with the revolutionary AutoFit™ headgear. Simply stretch the mask over your head and allow the AutoLock™ technology to secure your mask in place.
Simplify the mask fitting process and say goodbye to conventional headgear straps with the Fisher & Paykel Solo™ Nasal Pillow Mask.
Please note: Headgear is available as an option but not included automatically. It is also not required. If you'd like your order to include headgear, please select your preferred option above.
-
AutoFit™ Headgear - The AutoFit™ headgear reduces the potential for over-tightening that can be caused by the pull from conventional straps.
-
AutoLock™ Technology - Mask fitting has never been so simple. Start by stretching the mask to fit, then adjust the mask securely into place with a single touch. The AutoLock™ functions to hold your mask in place and dynamically responds to sleep movement and your CPAP therapy pressure.
-
AirPillow™ Cushions - Featuring the next generation of F&P AirPillow™ cushions, these nasal pillow cushions sit comfortably in and around your nose to provide a soft, stable seal.
-
myMask™ App - The Solo™ Nasal Pillow Mask works with the myMask™ App by F&P, providing direct access to their sizing and support tools to help increase therapy competence and compliance.
Please note: AutoLock™ Headgear is not included in this order unless manually selected above.
-
1 — Solo™ Nasal Mask Frame and Cushion (of selected size option)
-
1 — Short Tube
-
1 — Swivel
Please note: AutoLock™ headgear does not automatically come with the order. If you'd like your purchase to include headgear, please select your headgear option above. If you select a headgear option, the following will be included:
-
1 — Solo™ Nasal AutoLock™ Headgear
What Materials is the Fisher & Paykel Solo™ Mask Made Of?
Component: Material: Headgear Nylon (PA)/Spandex/Polypropylene (PP)/Polyurethane foam Cushion Silicone Frame Nylon (PA) Tube Polycarbonate (PC), Polyurethane (PU) Swivel Nylon (PA)
Frame Assembly/Nasal Pillow Size Options:
- Fisher & Paykel Solo™ Nasal Pillow Mask - without Headgear - Small - 400SLP131
- Fisher & Paykel Solo™ Nasal Pillow Mask - without Headgear - Medium - 400SLP132
- Fisher & Paykel Solo™ Nasal Pillow Mask - without Headgear - Large - 400SLP133
Optional Headgear Sizes (please note headgear is not automatically included, you must select a headgear option to add it to this order):
- Fisher & Paykel Solo™ Headgear (One-Size) - 400SL122
Breathing Style:
-
Nasal Breathers
- Mouth Breathers (when paired with a CPAP mask chinstrap)
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
-
Active Sleepers
-
Stomach Sleepers
Additional Considerations:
-
Low to Mid Pressure Settings
-
Minimal Contact
-
Glasses Wearers
-
Claustrophobia
-
Facial Hair
-
Full Field of Vision for Readers or TV Watchers
- Tossing and Turning During Sleep
Assembling Your Mask:
Refer to the assembly diagrams in these instructions.
- Push the Cushion on to the Frame.
- Push the Headgear down on to the Frame in front of the Exhaust Holes.
Fitting Your Mask:
Remove all packaging before using the mask.
Refer to the fitting images of these instructions.
- Anchor the grey strap behind your head and pull forward to stretch the Headgear over your head.
- Position the Cushion under your nose and orange strap on the top of your
head. - Connect the Swivel to the PAP device breathing tube. Turn on the PAP device.
- Pull the Cushion away from the nose to loosen the Headgear.
- Push the Cushion into the nose to tighten Headgear.
Warning: Do not overtighten the mask as this may result in facial deformation.
Caution: Failure to follow fitting instructions or using the incorrect mask size may
result in pressure sores or excessive leak causing eye injury
Disassembling Your Mask:
Refer to the disassembly diagrams in these instructions.
- Unclip the front of the Headgear from the Frame located in front of the
Exhaust Holes. - Pull the Cushion from the Frame.
Caution: Do not attempt to remove the swivel as this may compromise the function
of the mask.
Caution: Do not attempt to remove the tube from the frame as this may
compromise the function of the mask
| Operating Therapy Pressure Range |
| 4 to 25 cmH²O |
CPAPsupplies.com: Fisher & Paykel Solo™ Nasal CPAP Mask
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Solo™ Nasal Mask: Fitting Guide
Solo™ Nasal Mask: Cleaning Guide
This replacement CPAP mask assembly for the Solo™ Nasal Pillow Mask includes one Solo™ Nasal Pillow Frame replacement and one replacement Solo™ Mask Nose Pillow of your selected size. Solo™ Headgear replacement is not included unless selected above.
When To Replace Solo™ Nasal Pillow Mask Frame?
- Resupply Every 3 Months
When To Replace Solo™ Nasal Pillow Cushion?
-
Resupply Every 2 Weeks
When To Replace Solo™ AutoLock™ Headgear?
-
Resupply Every 6 Months
CPAPsupplies.com: CPAP Supplies Replacement Schedule Video
Cleaning Guide
Regularly cleaning your CPAP mask parts and components is crucial for avoiding the accumulation of bacteria, debris, oils, and other contaminants. This will help prevent the buildup of germs that may cause skin irritation and other unwanted side effects.
Before following the instructions below, first make sure your CPAP machine is unplugged from the power source, disconnect your mask and air tubing from your CPAP machine, and disassemble your mask components into 3 parts (nasal pillows, headgear, and frame):
Part Cleaning Frequency Instructions Nasal Pillows
Daily
- Using a mild detergent* and warm, drinking-quality water, gently clean your nasal pillows to remove any dirt, debris, and oils. Vinegar solutions (3:1, water:vinegar mix) can be used by soaking for 30 minutes to kill accumulated bacteria.
- Rinse thoroughly.
- Allow to air dry, avoiding direct sunlight.
Mask Frame
Weekly
- Using a mild detergent* and warm, drinking-quality water, gently clean your mask frame to remove any dirt, debris, and oils. Vinegar solutions (3:1, water:vinegar mix) can be used by soaking for 30 minutes to kill accumulated bacteria.
- Rinse thoroughly.
- Allow to air dry, avoiding direct sunlight.
Headgear
Weekly
- Using a mild detergent* and warm, drinking-quality water, gently clean your mask headgear to remove any dirt, debris, and oils. Do not use a vinegar solution.
- Rinse thoroughly.
- Hang dry, avoiding direct sunlight.
Chinstrap
Weekly
- Using a mild detergent* and warm, drinking-quality water, gently clean your mask chinstrap to remove any dirt, debris, and oils. Do not use a vinegar solution.
- Rinse thoroughly.
- Hang dry, avoiding direct sunlight.
*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
You can find more useful information regarding CPAP cleaning with this blog:
| SKU | pb_FP-Solo-Pillow-Mask |
|---|---|
| Model | pb_FP-Solo-Pillow-Mask |
| UPC | 09420012468741, 09420012468758, 09420012468765, 09420012474223, 09420012468789 |
| Prescription Required | No |
| Manufacturer's Warranty | 90-day limited manufacturer's warranty |
| FSA/HSA Eligible | Yes |
| Included | 400SLP131, 400SLP132, 400SLP133, 400SL122 |
