Fisher & Paykel Solo™ Nasal CPAP Mask with Headgear
The Solo™ Nasal CPAP Mask with Headgear comes with all of the necessary components of the Solo™ mask by Fisher & Paykel including the headgear with their innovative AutoFit™ technology for the best sleep with minimal assembly.
Fisher & Paykel Solo™ Nasal CPAP Mask with Headgear
Get the freedom of movement you need during sleep therapy with the Solo™ Nasal CPAP Mask with Headgear by Fisher & Paykel.
The AutoFit™ technology has an adjustable filament embedded in the Solo™ headgear that allows you to stretch the mask to fit as the AutoLock™ technology locks the headgear into place.
The nasal cushions feature F&P's Dynamic Support Technology allowing the mask seal to stay firmly secured while adjusting to various positions and angles during sleep.
-
AutoFit™ - the Solo™ mask by F&P is the first ever mask to feature the groundbreaking AutoFit™ technology that automatically adjusts to fit with a single touch.
-
Dynamic Support Technology - Once the mask is in place the cushion can be easily adjusted by pulling the cushion away from your face and then pushing it back on. The nasal cushion seals to your comfort and the Dynamic Support Technology gives you the freedom to move and adjust during sleep while holding the cushion seal firmly and comfortably in place.
-
AutoLock™ - the AutoLock™ technology within the Solo™ mask helps to hold the mask seal in place throughout the night and responds to sleep movement and CPAP-therapy pressure.
-
myMask™ App - Fisher & Paykel's myMask™ App is readily available to Solo™ users providing direct access to sizing & support tools to assist with increasing therapy competence and compliance.
-
1 — Solo™ Mask
-
1 — Nasal Cushion (Small, Medium, Large or Wide)
-
1 — Short Tube
-
1 — Swivel
-
1 — AutoLock™ Headgear
If you're looking to purchase the Fisher & Paykel Solo™ Nasal CPAP Mask components without a prescription, you can find them here.
Solo™ Nasal Mask Materials:
| Component: | Material: |
|---|---|
| Headgear | Nylon (PA)/Spandex/Polypropylene (PP)/Polyurethane foam |
| Cushion | Silicone |
| Frame | Nylon (PA) |
| Tube | Polycarbonate (PC), Polyurethane (PU) |
| Swivel | Nylon (PA) |
-
Small - Fisher & Paykel Solo™ Nasal Mask with Headgear - SLN1SA
-
Medium - Fisher & Paykel Solo™ Nasal Mask with Headgear - SLN1MA
-
Large - Fisher & Paykel Solo™ Nasal Mask with Headgear - SLN1LA
-
Wide - Fisher & Paykel Solo™ Nasal Mask with Headgear - SLN1WA
Breathing Style:
-
Nasal Breathers
- Mouth Breathers (when paired with a CPAP mask chinstrap)
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
-
Active Sleepers
Additional Considerations:
-
High Pressure Settings
- Glasses Wearers
- Claustrophobia
- Facial Hair
-
Full Field of View for Reading or Watching TV Before Bed
-
Tossing and Turning During Sleep
Assembling Your Mask:
Refer to the assembly diagrams in these instructions.
- Push the Cushion on to the Frame.
- Push the Headgear down on to the Frame in front of the Exhaust Holes.
Fitting Your Mask:
Remove all packaging before using the mask.
Refer to the fitting images of these instructions.
- Anchor the grey strap behind your head and pull forward to stretch the Headgear over your head.
- Position the Cushion under your nose and orange strap on the top of your
head. - Connect the Swivel to the PAP device breathing tube. Turn on the PAP device.
- Pull the Cushion away from the nose to loosen the Headgear.
- Push the Cushion into the nose to tighten Headgear.
Warning: Do not overtighten the mask as this may result in facial deformation.
Caution: Failure to follow fitting instructions or using the incorrect mask size may
result in pressure sores or excessive leak causing eye injury
Disassembling Your Mask:
Refer to the disassembly diagrams in these instructions.
- Unclip the front of the Headgear from the Frame located in front of the
Exhaust Holes. - Pull the Cushion from the Frame.
Caution: Do not attempt to remove the swivel as this may compromise the function
of the mask.
Caution: Do not attempt to remove the tube from the frame as this may
compromise the function of the mask
| Operating Therapy Pressure Range |
| 4 to 25 cmH²O |
CPAPsupplies.com - Fisher & Paykel Solo™ Nasal CPAP Mask
Solo™ Nasal Mask: Fitting Guide
Solo™ Nasal Mask: Cleaning Guide
- CPAP Mask Frame Replacement Frequency: Resupply Every 3 Months
- CPAP Mask Cushions/Pillows Replacement Frequency: Resupply Every 2 Weeks
- CPAP Mask Headgear Replacement Frequency: Resupply Every 6 Months
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Cleaning Guide
Regularly cleaning your CPAP mask parts and components is crucial for avoiding the accumulation of bacteria, debris, oils, and other contaminants. This will help prevent the buildup of germs that may cause skin irritation and other unwanted side effects.
Before following the instructions below, first make sure your CPAP machine is unplugged from the power source, disconnect your mask and air tubing from your CPAP machine, and disassemble your mask components into 3 parts (nasal cushions, headgear, and frame):
| Part | Cleaning Frequency | Instructions |
|
Nasal Cushions |
Daily |
|
|
Mask Frame |
Weekly |
|
|
Headgear |
Weekly |
|
|
Chinstrap |
Weekly |
|
*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
You can find more useful information regarding CPAP cleaning with this blog:
| Brand | Fisher & Paykel |
|---|---|
| SKU | p_FP-Solo-Mask-and-HG |
| Model | p_FP-Solo-Mask-and-HG |
| UPC | 9420012468130, 9420012468147, 9420012468154, 9420012468161 |
| Prescription Required | Yes |
| Weight | 0.09 lbs |
| Manufacturer's Warranty | 90-day limited manufacturer's warranty |
| FSA/HSA Eligible | Yes |
| Included | SLN1SA, SLN1MA, SLN1LA, SLN1WA |
1 Item Added to Cart
