Fisher & Paykel Zest™ Q Nasal CPAP Mask
$84.00
The Zest™ Nasal Masks combine the Easy Clip Silicone Seal and Advanced Air Diffuser with proven technology that makes Fisher & Paykel Healthcare masks perform so well.
Fisher & Paykel Zest™ Q Nasal CPAP Mask Overview
The Fisher & Paykel Zest™ Q Nasal CPAP Mask System is lightweight, quiet, and easy to fit, offering premium comfort with its unique design. The Zest™ Q uses Auto-Contouring foam cushion technology that automatically adjusts to a wide range of facial and nasal size variations. The Easy-Clip silicone seal provides precise frame alignment to ensure comfort and performance.
Please note: headgear is not included in your order unless selected above.
-
Auto-contouring FlexiFit™ technology adjusts to effectively seal around a range of unique nasal and facial features
-
Patients can move throughout the night and during therapy without worrying about leaks. The anti-leak Glider™ Strap system prevents leaks by adding flexibility to the headgear straps
-
Glider™ Clips allow the patient to remove their headgear in one simple step without having to adjust their headgear
-
Easy-Clip Silicone Seal allows the cushion to be easily removed and attached to the frame for effective cleaning
-
Variable Thickness Silicone (VTS™) provides an especially soft and comfortable cushion seal
-
The patient and their partner enjoy quiet therapy as the Advanced Air Diffuser disperses air away from the bed quietly. This diffuser is maintenance free
-
Stretchgear™ Headgear is a comfortable, elastic headgear that works with the headgear clips to maintain an effective seal
-
1 — Zest™ Q Nasal Mask Base (Forehead Rest, Glider™ Strap attached)
-
1 — Zest™ Q Foam Cushion & Silicone Seal (of selected size)
-
1 — Elbow
-
1 — Swivel
Please note: headgear does not automatically come with the order. If you'd like your purchase to include headgear, please select your headgear option above. If you select a headgear option, the following will be included:
-
1 — StretchGear™ Headgear
Breathing Style:
-
Nasal Breathers
- Mouth Breathers (when paired with a CPAP mask chinstrap)
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
-
Active Sleepers
Additional Considerations:
-
High Pressure Settings
- Glasses Wearers
- Claustrophobia
- Facial Hair
-
Full Field of View for Reading or Watching TV Before Bed
-
Tossing and Turning During Sleep
Fitting Your Mask:
Remove all packaging before using the mask.
Refer to the fitting images of these instructions.
- Remove the plastic cover from the Silicone Seal.
- Holding your mask in one hand, spread the Stretchgear Headgear with your free
hand, just enough to fit comfortably over your head. - Lightly hold the mask against your face, covering the nose, then slowly pull the Headgear over your head.
- Attach the Headgear to the Glider Strap.
- Pull the lower straps as low as possible down the back of your neck. Gently tighten straps to remove slack. Connect to CPAP/Bi-Level machine set at prescribed pressure. If necessary, tighten the lower straps to eliminate any leaks (avoid over-tightening the straps). When you need to remove your mask, unhook the Stretchgear Headgear from the Glider Strap.
Assembling Your Mask:
Refer to the assembly diagrams in these instructions.
- Place the Foam Cushion into the Silicone Seal in the orientation shown in the
diagram. - Starting with the slot at the apex of the Silicone Seal, assemble onto Mask Base. Push firmly together.
- Lay the Stretchgear Headgear flat, with the loop side down. Position the assembled
mask over the Headgear and attach the four straps into the corresponding slots in the
Forehead Rest and the Glider Strap. This can be done without undoing the VELCRO® brand tabs, by sliding the Headgear into the slots.
| Operating Therapy Pressure Range |
| 3 to 25 cmH²O |
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Zest™: Introduction
Zest™: Fitting Guide
Zest™: Cleaning Guide
- CPAP Mask Frame Replacement Frequency: Resupply Every 3 Months
- CPAP Mask Cushions/Pillows Replacement Frequency: Resupply Every 2 Weeks
- CPAP Mask Headgear Replacement Frequency: Resupply Every 6 Months
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Cleaning Guide
Regularly cleaning your CPAP mask parts and components is crucial for avoiding the accumulation of bacteria, debris, oils, and other contaminants. This will help prevent the buildup of germs that may cause skin irritation and other unwanted side effects.
Before following the instructions below, first make sure your CPAP machine is unplugged from the power source, disconnect your mask and air tubing from your CPAP machine, and disassemble your mask components into 3 parts (nasal cushions, headgear, and frame):
| Part | Cleaning Frequency | Instructions |
|
Nasal Cushions |
Daily |
|
|
Mask Frame |
Weekly |
|
|
Headgear |
Weekly |
|
|
Chinstrap |
Weekly |
|
*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
You can find more useful information regarding CPAP cleaning with this blog:
| Brand | Fisher & Paykel |
|---|---|
| SKU | pb_F&P_zest_nasal |
| Model | pb_F&P_zest_nasal |
| UPC | 09420012422385, 09420012421388, 09420012422613 |
| Prescription Required | No |
| Manufacturer's Warranty | 90-day limited manufacturer's warranty |
| FSA/HSA Eligible | Yes |
| Included | 400HC576, 400HC577, 400HC578, 400HC316, 400HC314 |
