Resmed Swift™ FX Nasal Pillow CPAP Mask Fit Pack
With super soft fit and a minimal appearance, the Swift™ FX makes it easy to forget about your mask and remember what its like to get a great nights sleep.



Resmed Swift™ FX Nasal Pillow CPAP Mask Fit Pack Overview
The Swift™ FX Nasal Pillows System's minimal design reinforces a sense of freedom. Unprecedented softness, simplicity, and stability, and a flexible fluid form follows to facial contours and user movements. The flexible headgear contours the unique bone structure of each individual to eliminate facial marks. This system has minimal facial contact and is easy to assemble and adjust.
-
Dual-wall cushion and flexible cushion maintain a tight seal without limiting movement
-
Spring-flex tubing is lightweight and flexible to accommodate for all sleeping positions
-
Minimal adjustments ensure an easy fit and easy cleaning


-
1 — Swift™ FX Mask Frame
-
1 — Swift™ FX Adjustable Headgear
-
3 — Swift™ FX Nasal Pillows (1- Small, 1 - Medium, 1 - Large)
If you're looking to purchase the Resmed Swift™ FX Nasal Pillow CPAP Mask components without a prescription, you can find them here.
Breathing Style:
-
Nasal Breathers
- Mouth Breathers (when paired with a CPAP mask chinstrap)
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
-
Active Sleepers
-
Stomach Sleepers
Additional Considerations:
-
Low to Mid Pressure Settings
-
Minimal Contact
-
Glasses Wearers
-
Claustrophobia
-
Facial Hair
-
Full Field of Vision for Readers or TV Watchers
- Tossing and Turning During Sleep
Assembling Your Mask:


Fitting Your Mask:
Refer to the fitting diagrams in these instructions.
- Holding the pillows at your nose, pull your headgear over your head. Your headgear should sit midway between your eyes and ears.
- Adjust the top strap first. Pull the strap through the buckle one notch at a time. Do not overtighten.
- Adjust the back strap to fine-tune the fitting if necessary. Do not overtighten. The back strap can be positioned over or under your hair.
- Make a fine adjustment to position nasal pillows comfortably. Swift FX pillows are designed to provide a natural fit you won’t need to adjust them too much.
- Connect the Swift FX short tube to the device air tubing. Swift FX is now fitted and ready for use.
- With the device turned on, check that the nasal pillows are properly inflated. To do
this, pull the nasal pillows away from the face and cheek, make sure they are inflated and reposition them in the nose.


Disassembling Your Mask:
Refer to the disassembly diagrams in these instructions.
- Remove your nasal pillow cushion by lifting up on the mask frame tab and peeling away from your your nasal pillow cushion.
- Repeat Step 1 on the opposite side of your mask frame.
- Pull up and out on the elbow.
- Twist the elbow as your pulling out to detach from the mask frame.


Operating Therapy Pressure Range |
4 to 20 cm H2O |
- CPAP Mask Frame Replacement Frequency: Resupply Every 3 Months
- CPAP Mask Cushions/Pillows Replacement Frequency: Resupply Every 2 Weeks
- CPAP Mask Headgear Replacement Frequency: Resupply Every 6 Months
Cleaning Guide
Regularly cleaning your CPAP mask parts and components is crucial for avoiding the accumulation of bacteria, debris, oils, and other contaminants. This will help prevent the buildup of germs that may cause skin irritation and other unwanted side effects.
Before following the instructions below, first make sure your CPAP machine is unplugged from the power source, disconnect your mask and air tubing from your CPAP machine, and disassemble your mask components into 3 parts (nasal pillows, headgear, and frame):
Part | Cleaning Frequency | Instructions |
Nasal Pillows |
Daily |
|
Mask Frame |
Weekly |
|
Headgear |
Weekly |
|
Chinstrap |
Weekly |
|
*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
You can find more useful information regarding CPAP cleaning with this blog:
Brand | Resmed |
---|---|
Weight | 0.37 lbs |
SKU | 4250 |
Model | 61500 |
HCPCS | A7034 |
UPC | 619498615001 |
Prescription Required | Yes |
Manufacturer's Warranty | 90-day limited manufacturer's warranty |
Color | Clear & Blue |
FSA/HSA Eligible | Yes |
Dimensions | Short Tube Length: 13.25", Outer Diameter: 22mm |