Resmed AirFit™ P10 for Her Nasal Pillow CPAP Mask Fit Pack
The AirFit™ P10 for Her offers the proven performance and reliability of the popular Swift™ FX mask series, but is approximately 50% quieter and 50% lighter.
Resmed AirFit™ P10 for Her Nasal Pillow CPAP Mask Fit Pack Overview
The AirFit™ P10 for Her nasal pillow CPAP mask is one of Resmed's quietest masks, and the "for Her" edition offers that remarkable performance and comfort in a female friendly size. The AirFit™ P10 for Her offers the proven performance and reliability of the popular Swift™ FX mask series, but is approximately 50% quieter and 50% lighter. This system includes extra small, small and medium pillows.
-
1 — AirFit™ P10 for Her Mask Frame
-
3 — P10 Nasal Pillows (1 — Extra Small, 1 — Small, 1 — Medium)
-
1 — QuickFit™ Headgear
-
1 — Short Tube
If you're looking to purchase the Resmed AirFit™ P10 for Her Nasal Pillow CPAP Mask components without a prescription, you can find them here.
Breathing Style:
-
Nasal Breathers
- Mouth Breathers (when paired with a CPAP mask chinstrap)
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
-
Active Sleepers
-
Stomach Sleepers
Additional Considerations:
-
Low to Mid Pressure Settings
-
Minimal Contact
-
Glasses Wearers
-
Claustrophobia
-
Facial Hair
-
Full Field of Vision for Readers or TV Watchers
- Tossing and Turning During Sleep
Assembling Your Mask:
Refer to the assembly diagrams in these instructions.
- With the grey side facing out, insert each end of the headgear band over the stabilisers through the buttonholes. Secure in place by wrapping each band end up and around the nodes. Holding the split bands, pull the headgear from the stabiliser to ensure it is tightly secure around the nodes. Ensure the headgear band is not twisted.
- Attach the pillows to the mask frame by inserting the top and bottom clips into the correct slots (shorter clip into top slot, longer clip into bottom slot) on the mask frame. Your mask is now reassembled.
- Ensure the inner walls of the nasal pillows are not compressed or collapsed. If they are, squeeze each nasal pillow so they return to the correct shape.
Fitting Your Mask:
Refer to the fitting diagrams in these instructions.
- Hold the pillows away from your nose ensuring that the pillow size (eg, M) with the left (L) and right (R) indicators are correctly facing towards you then guide the nasal pillows into your nostrils (L into your left nostril, R into your right nostril). Pull the headgear over your head by holding the bottom band and stretching it around the back of your head. The top band should sit comfortably on top of your head.
Tip: There are raised logos on top of the frame so you can feel the correct way up when fitting in the dark. - Move the mask away from your face then place it back to get a comfortable fit. Ensure the nasal pillows fit securely into your nostrils with both pillows positioned upright.
- Finally, connect the end of the mask tubing into your device air tubing. Your mask is now fitted and ready to use. When the device is running, a light breeze should be felt through the vent. To inspect the vent place a finger close but not over the entire vent area.
Disassembling Your Mask:
If the mask is connected to your device, disconnect the device air tubing
from the short tube.
- Holding the top of the mask tubing, squeeze and pull the pillows away from the mask frame.
- Unhook the headgear from the stabiliser by pulling on the end cap to reveal the buttonhole.
- Slide the headgear off the end of the stabiliser.
| Operating Therapy Pressure Range |
| 4 - 20 cm H²O |
CPAPsupplies.com: CPAP Supplies Replacement Schedule
AirFit™ P10: Fitting Guide
AirFit™ P10: Nasal Pillow Sizing Guide
AirFit™ P10: Cleaning Guide
- CPAP Mask Frame Replacement Frequency: Resupply Every 3 Months
- CPAP Mask Cushions/Pillows Replacement Frequency: Resupply Every 2 Weeks
- CPAP Mask Headgear Replacement Frequency: Resupply Every 6 Months
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Cleaning Guide
Regularly cleaning your CPAP mask parts and components is crucial for avoiding the accumulation of bacteria, debris, oils, and other contaminants. This will help prevent the buildup of germs that may cause skin irritation and other unwanted side effects.
Before following the instructions below, first make sure your CPAP machine is unplugged from the power source, disconnect your mask and air tubing from your CPAP machine, and disassemble your mask components into 3 parts (nasal pillows, headgear, and frame):
| Part | Cleaning Frequency | Instructions |
|
Nasal Pillows |
Daily |
|
|
Mask Frame |
Weekly |
|
|
Headgear |
Weekly |
|
|
Chinstrap |
Weekly |
|
*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
You can find more useful information regarding CPAP cleaning with this blog:
| Brand | Resmed |
|---|---|
| Weight | 0.36 lbs |
| SKU | 8508 |
| Model | 62910 |
| HCPCS | A7034 |
| UPC | 619498629107 |
| Prescription Required | Yes |
| Manufacturer's Warranty | 90-day limited manufacturer's warranty |
| FSA/HSA Eligible | Yes |
1 Item Added to Cart
