Resmed AirFit™ F10 for Her Full Face CPAP Mask with Headgear
Compact and lightweight, the user-friendly Resmed AirFit™ F10 for Her Full Face CPAP Mask provides a clear field of vision with minimal facial contact. Get a better seal and less leaks create more productive CPAP therapy with the ResMed AirFit™ F10 for Her Full Face CPAP Mask.
Resmed AirFit™ F10 for Her Full Face CPAP Mask with Headgear Overview
Rest easy with this lightweight, barely there type of feel full face mask by ResMed. The soft and pliable cushion is a dual layer of complete silicone to optimize comfort. The dual layer ensures a better seal and less leaks therefore creating a more productive CPAP therapy session. The Resmed AitFit™ F10 for Her Full Face CPAP mask and Headgear is the answer if you are looking for a mask that not only feels great, but performs great.
-
Lightweight and comfortable
-
QuickAir™ - 50% quieter than most other masks on the market today
-
Simplistic design
-
Minimal parts
-
Clear and unobstructed vision
-
Soft silicon cushion
-
1 — AirFit™ F10 for Her Mask Frame and Cushion (of selected size option)
-
1 — Elbow
-
1 — AirFit™ F10 for Her Headgear
If you're looking to purchase the Resmed AirFit™ F10 for Her Full Face CPAP Mask components without a prescription, you can find them here.
-
Extra Small: Extra Small Cushion, XS/S Frame - AirFit™ F10 for Her Full Face CPAP Mask with Headgear - 63139
-
Small: Small Cushion, XS/S Frame - AirFit™ F10 for Her Full Face CPAP Mask with Headgear - 63140
-
Medium: Medium Cushion, M/L Frame - AirFit™ F10 for Her Full Face CPAP Mask with Headgear - 63141
Breathing Style:
-
Mouth Breathers
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
Additional Considerations:
-
High Pressure Settings
-
Chronic Allergies or Nasal Congestion
Assembling Your Mask:
Refer to the assembly diagrams in these instructions.
- Press the top of the frame onto the rest of the mask, ensuring it clicks into place.
- Press the bottom corners of the frame onto the rest of the mask, ensuring they click into place.
- To fit the optional soft sleeves, pull them over the upper arms of the frame.
- Attach the top headgear straps to the frame by looping through each of the upper headgear hooks. Ensure that the Resmed logo on the headgear is facing outward and right side up.
- Attach the elbow to the air tubing. Attach the elbow and air tubing to the mask by pressing the side buttons and pushing the elbow into the mask. Pull on the elbow to check that it sits securely in the mask.
Fitting Your Mask:
Refer to the fitting diagrams in these instructions.
- Remove the elbow from the mask by pressing the side buttons and pulling the elbow away.
- With both lower headgear straps released, hold the mask against your face and pull the headgear over your head. Ensure that the label on the back of the headgear faces outwards when the headgear is put on.
- Undo the fastening tabs on the upper headgear straps. Pull the straps evenly until the mask is stable and positioned as shown in the illustrations. Reattach the fastening tabs.
- Bring the lower straps below your ears and loop the headgear into the lower hooks on the frame.
- Undo the fastening tabs on the lower headgear straps. Pull the straps evenly until the mask sits firmly on the chin and reattach the fastening tabs.
- Connect the air tubing from your device to the elbow. Attach the elbow to the mask by pressing the side buttons and pushing the elbow into the mask. Turn on your device so that it is blowing air.
- Undo the fastening tabs on the upper headgear straps. Readjust the straps evenly only enough that a seal is achieved and reattach the fastening tabs. Overtightening may cause leaks.
- Your mask and headgear should be positioned as shown.
Disassembling Your Mask:
Refer to the disassembly diagrams in these instructions.
- Unhook the upper headgear straps from the frame. There is no need to undo the fastening tabs.
- Remove the elbow from the mask by pressing the side buttons and pulling the elbow away. Remove the elbow from the air tubing.
- While holding the bottom of the hook, pull the corner of the frame slightly away from the side of the mask.
- Remove the frame from the rest of the mask.
- If the soft sleeves are fitted, remove them by pulling them off of the frame.
| Operating Therapy Pressure Range |
| 3 to 40 cm H²O |
CPAPsupplies.com: CPAP Supplies Replacement Schedule
AirFit™ F10: Fitting Guide
AirFit™ F10: Cleaning and Assembly Guide
- CPAP Mask Frame Replacement Frequency: Resupply Every 3 Months
- CPAP Mask Cushions/Pillows Replacement Frequency: Resupply Every 2 Weeks
- CPAP Mask Headgear Replacement Frequency: Resupply Every 6 Months
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Cleaning Guide
Regularly cleaning your CPAP mask parts and components is crucial for avoiding the accumulation of bacteria, debris, oils, and other contaminants. This will help prevent the buildup of germs that may cause skin irritation and other unwanted side effects.
Before following the instructions below, first make sure your CPAP machine is unplugged from the power source, disconnect your mask and air tubing from your CPAP machine, and disassemble your mask components into 3 parts (mask cushions, headgear, and frame):
| Part | Cleaning Frequency | Instructions |
|
Mask Cushions |
Daily |
|
|
Mask Frame |
Weekly |
|
|
Headgear |
Weekly |
|
|
Chinstrap |
Weekly |
|
*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
You can find more useful information regarding CPAP cleaning with this blog:
| Brand | Resmed |
|---|---|
| SKU | p_AF-F10-ForHer-wHG |
| Model | p_AF-F10-ForHer-wHG |
| UPC | 619498631391, 619498631407, 619498631414 |
| Prescription Required | Yes |
| Manufacturer's Warranty | 90-day limited manufacturer's warranty |
| FSA/HSA Eligible | Yes |
| Included | 63139, 63140, 63141 |
1 Item Added to Cart
