Fisher & Paykel Solo™ Nasal CPAP Mask
$78.00
Fisher & Paykel introduces the first ever AutoFit™ mask with their Solo™ Nasal CPAP Mask. The revolutionary AutoFit™ technology allows you to stretch the mask to fit and make adjustments with a simple touch and is held comfortably in place by the AutoLock™ headgear.
Fisher & Paykel Solo™ Nasal CPAP Mask Overview
The Fisher & Paykel Solo Nasal Mask is the first ever AutoFit™ mask for sleep apnea therapy, making setup and adjustments a simplicity. The ground-breaking AutoFit™ technology allows you to stretch the mask over your head and adjust the mask into place with one touch.
Please note: headgear is not included unless selected above.
- AutoFit™ - The AutoFit™ functions to reduce the over-tightening that is often caused by the pull from conventional straps.
- Dynamic Support Technology - The nasal cushion allows you the freedom of movement during sleep while keeping the cushion firmly and comfortably in place.
- AutoLock™ Technology - Simply stretch the mask to fit and adjust the mask into place with a single touch. The AutoLock™ then functions to hold the mask in place and dynamically responds to sleep movement and CPAP-therapy pressure.
- myMask™ App - The F&P Solo™ Mask works in conjunction with their myMask™ App, providing users direct access to sizing and support tools to help increase therapy competence and compliance.
Please note: AutoLock™ Headgear is not included in this order unless manually selected above.
-
1 - Solo™ Nasal Mask Frame and Cushion (of selected size option)
-
1- Short Tube
-
1 - Swivel
Please note: AutoLock™ headgear does not automatically come with the order. If you'd like your purchase to include headgear, please select your headgear option above. If you select a headgear option, the following will be included:
-
1 - Solo™ Nasal AutoLock™ Headgear
Solo™ Nasal Mask Materials:
| Component: | Material: |
|---|---|
| Headgear | Nylon (PA)/Spandex/Polypropylene (PP)/Polyurethane foam |
| Cushion | Silicone |
| Frame | Nylon (PA) |
| Tube | Polycarbonate (PC), Polyurethane (PU) |
| Swivel | Nylon (PA) |
Frame Assembly/Nasal Cushion Size Options:
- Fisher & Paykel Solo™ Nasal Mask - without Headgear - Small - 400SLN131
- Fisher & Paykel Solo™ Nasal Mask - without Headgear - Medium - 400SLN132
- Fisher & Paykel Solo™ Nasal Mask - without Headgear - Large - 400SLN133
- Fisher & Paykel Solo™ Nasal Mask - without Headgear - Wide - 400SLN134
Optional Headgear Sizes (please note headgear is not automatically included, you must select a headgear option to add it to this order):
-
Fisher & Paykel Solo™ Headgear (One-Size) - 400SL122
Breathing Style:
-
Nasal Breathers
- Mouth Breathers (when paired with a CPAP mask chinstrap)
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
-
Active Sleepers
Additional Considerations:
-
High Pressure Settings
- Glasses Wearers
- Claustrophobia
- Facial Hair
-
Full Field of View for Reading or Watching TV Before Bed
-
Tossing and Turning During Sleep
Assembling Your Mask:
Refer to the assembly diagrams in these instructions.
- Push the Cushion on to the Frame.
- Push the Headgear down on to the Frame in front of the Exhaust Holes.
Fitting Your Mask:
Remove all packaging before using the mask.
Refer to the fitting images of these instructions.
- Anchor the grey strap behind your head and pull forward to stretch the Headgear over your head.
- Position the Cushion under your nose and orange strap on the top of your
head. - Connect the Swivel to the PAP device breathing tube. Turn on the PAP device.
- Pull the Cushion away from the nose to loosen the Headgear.
- Push the Cushion into the nose to tighten Headgear.
Warning: Do not overtighten the mask as this may result in facial deformation.
Caution: Failure to follow fitting instructions or using the incorrect mask size may
result in pressure sores or excessive leak causing eye injury
Disassembling Your Mask:
Refer to the disassembly diagrams in these instructions.
- Unclip the front of the Headgear from the Frame located in front of the
Exhaust Holes. - Pull the Cushion from the Frame.
Caution: Do not attempt to remove the swivel as this may compromise the function
of the mask.
Caution: Do not attempt to remove the tube from the frame as this may
compromise the function of the mask
| Operating Therapy Pressure Range |
| 4 to 25 cmH²O |
CPAPsupplies.com - Fisher & Paykel Solo™ Nasal CPAP Mask
Solo™ Nasal Mask: Fitting Guide
Solo™ Nasal Mask: Cleaning Guide
- CPAP Mask Frame Replacement Frequency: Resupply Every 3 Months
- CPAP Mask Cushions/Pillows Replacement Frequency: Resupply Every 2 Weeks
- CPAP Mask Headgear Replacement Frequency: Resupply Every 6 Months
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Cleaning Guide
Regularly cleaning your CPAP mask parts and components is crucial for avoiding the accumulation of bacteria, debris, oils, and other contaminants. This will help prevent the buildup of germs that may cause skin irritation and other unwanted side effects.
Before following the instructions below, first make sure your CPAP machine is unplugged from the power source, disconnect your mask and air tubing from your CPAP machine, and disassemble your mask components into 3 parts (nasal cushions, headgear, and frame):
| Part | Cleaning Frequency | Instructions |
|
Nasal Cushions |
Daily |
|
|
Mask Frame |
Weekly |
|
|
Headgear |
Weekly |
|
|
Chinstrap |
Weekly |
|
*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
You can find more useful information regarding CPAP cleaning with this blog:
| SKU | pb_FP-Solo-Mask |
|---|---|
| Model | pb_FP-Solo-Mask |
| UPC | 9420012468130, 9420012468147, 9420012468154, 9420012468161 |
| Prescription Required | No |
| Manufacturer's Warranty | 90-day limited manufacturer's warranty |
| FSA/HSA Eligible | Yes |
| Included | 400SLN131, 400SLN132, 400SLN133, 400SLN134, 400SL122 |
