Fisher & Paykel Eson™ 2 Nasal CPAP Mask Fit Pack
This is the Fisher & Paykel Eson™ 2 Nasal CPAP Mask Fit Pack that includes all 3 cushions sizes (Small, Medium, Large), so that you can try each and decides which one fits you best for optimal CPAP treatment and performance.
Fisher & Paykel Eson™ 2 Nasal CPAP Mask Fit Pack Overview
With over 20 improvements implemented, the Fisher & Paykel Eson™ 2 Nasal CPAP Mask has been enhanced to provide innovative comfort and functionality.
This easy-to-use CPAP mask is designed to meet your individual needs and provide quality rest.
-
Lightweight, Comfortable Design - Enjoy the advanced comfort of the Eson™ 2 Nasal mask as it's breathable, lightweight headgear and frame move with you to provide a soft and secure seal. The eco-friendly diffuser reduces sound by 33% to help you and your partner sleep peacefully.
-
RollFit™ Seal - The RollFit seal literally rolls back and forth as you move to provide a secure seal that relieves pressure on the nose. Plus, the incredibly soft cushion fits into the frame with a simple snap and can easily be replaced.
-
Minimal Design - The minimalist design of the Eson 2 provides a mask with fewer parts to assemble. You can quickly take it apart for cleaning, then visual light cues will help you put it back together. Every aspect of this redesigned mask provides outstanding performance.
-
Breathable, Flexible Headgear - By having flexible headgear that stretches as you pull the mask on, it's easy to slip on and off without the hassle of unclipping or readjusting clips. The mask also includes ergonomic clips and fasteners to provide the perfect fit.
-
1 — Eson™ 2 Mask Frame
-
1 — Eson™ 2 Headgear (Medium/Large Size)
-
2 — Headgear Clips
-
3 — Eson™ 2 Nasal Cushions (1 - Small, 1 - Medium, 1 - Large)
-
1 — Elbow
-
1 — Swivel
-
1 — Diffuser
If you're looking to purchase the Fisher & Paykel Eson™ 2 Nasal CPAP Mask components without a prescription, you can find them here.
Breathing Style:
-
Nasal Breathers
- Mouth Breathers (when paired with a CPAP mask chinstrap)
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
-
Active Sleepers
Additional Considerations:
-
High Pressure Settings
- Glasses Wearers
- Claustrophobia
- Facial Hair
-
Full Field of View for Reading or Watching TV Before Bed
-
Tossing and Turning During Sleep
Assembling Your Mask:
Refer to the assembly diagrams in these instructions.
- Push the Silicone Seal onto the Mask Frame until you hear it click firmly into place.
- Push the Swivel onto the Elbow.
- Place the Diffuser onto the Elbow.
To assemble headgear: - Thread the Headgear Clips back onto Headgear.
- Thread the forehead straps of the Headgear through the slots in the Mask Frame.
- Hook the Headgear Clips onto the Mask Frame.
Fitting Your Mask:
Remove all packaging before using the mask.
Refer to the fitting images of these instructions.
- Remove all packaging before using your mask.
- Hold open the bottom straps of the Headgear with the Mask Frame facing downwards.
- Guide the Headgear over your head so that the Silicone Seal is resting on your forehead.
- Place your hands on the bottom straps on either side of the Mask Frame and pull out and downwards. Ensure the Silicone Seal rests over your nose and the blue top strap is sitting on your forehead.
- Gently tighten the headgear straps of the mask Headgear starting with the blue forehead straps followed by the bottom straps.
Tips:
• If you are experiencing mask leaks, you may need to lift the
Silicone Seal off your face and reposition it again.
• Ensure the mask’s headgear straps are not fastened too
tightly.
• The forehead straps should rest horizontally on the forehead,
just above the ears.
Disassembling Your Mask:
Refer to the disassembly diagrams in these instructions.
- Unhook the Headgear Clips from the Mask Frame.
- Slide the forehead straps of the Headgear downwards from the top of the Mask Frame.
- Remove the Silicone Seal from the Mask Frame.
- Remove the Swivel from the Elbow.
- Remove the Diffuser from the Elbow.
| Operating Therapy Pressure Range |
| 4 to 30 cmH²O |
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Eson™ 2: Introduction
Eson™ 2: Fitting, Cleaning & Assembly Guide
- CPAP Mask Frame Replacement Frequency: Resupply Every 3 Months
- CPAP Mask Cushions/Pillows Replacement Frequency: Resupply Every 2 Weeks
- CPAP Mask Headgear Replacement Frequency: Resupply Every 6 Months
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Cleaning Guide
Regularly cleaning your CPAP mask parts and components is crucial for avoiding the accumulation of bacteria, debris, oils, and other contaminants. This will help prevent the buildup of germs that may cause skin irritation and other unwanted side effects.
Before following the instructions below, first make sure your CPAP machine is unplugged from the power source, disconnect your mask and air tubing from your CPAP machine, and disassemble your mask components into 3 parts (nasal cushions, headgear, and frame):
| Part | Cleaning Frequency | Instructions |
|
Nasal Cushions |
Daily |
|
|
Mask Frame |
Weekly |
|
|
Headgear |
Weekly |
|
|
Chinstrap |
Weekly |
|
*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
You can find more useful information regarding CPAP cleaning with this blog:
| Brand | Fisher & Paykel |
|---|---|
| Weight | 0.28 lbs |
| SKU | 18380 |
| Model | ESN2SML |
| HCPCS | A7034 |
| UPC | 9420012455673 |
| Prescription Required | Yes |
| Manufacturer's Warranty | 90-day limited manufacturer's warranty |
| FSA/HSA Eligible | Yes |
| Dimensions | Mask Frame: 2.5" (L) x 1/2" (W) x 4" (H); Mask Elbow: 3/4" (Inner Diameter) x 1 1/2" (H); Mask Swivel: 3/4" (Inner Diameter) x 1 1/4" (H); Headgear: 10.16" (L) x 8.27" (W) x 8.35" (H) |
| Size | Fit Pack |
-
Universal Inline Heat Moisture Exchange CPAP Humidifier FilterSpecial Price $4.95 Regular Price $5.95
