Resmed AirTouch™ N30i Nasal CPAP Mask Starter Pack
The AirTouch™ N30i is the lightest Resmed mask to date. Featuring a tube-up, minimal contact design with a SpringFit™ frame that is wrapped in a soft, flexible fabric. It’s the first nasal mask to use Resmed's ComfiSoft™ cushions made with a silicone-coated fabric to provide a breathable, comfortable seal.
Resmed AirTouch™ N30i Nasal CPAP Mask Starter Pack Overview
The Resmed AirTouch™ N30i is a minimal contact nasal CPAP mask made with a flexible, silicone frame that's wrapped in a soft fabric to minimize facial irritation. It's the first mask to utilize nasal ComfiSoft™ cushions by Resmed, featuring a fabric fused with silicone to provide a naturally soft texture for optimal comfort.
This starter pack provides you with the flexibility of having all nasal cushions sizes to try without having to utilize a cushion sizing guide.
- SpringFit™ Frame - The SpringFit™ frame is wrapped in a soft, flexible fabric designed to adapt to your facial contours and head shape for an easy fit.
- ComfiSoft™ Cushions - Resmed's innovative ComfiSoft™ nasal cushions feature a fabric padding fused with silicone designed to provide a secure, comfortable seal.
- QuietAir™ - The QuietAir™ venting diffuser helps reduce noise created during sleep therapy, making for a quieter environment for you and your sleep companion during your CPAP therapy
- Flexibility - The tube-up minimal contact mask design helps to prevent tubing pull, providing you enhanced freedom of movement during your sleep therapy.
- Quick-Release Elbow - The Quick-release elbow makes connecting and disconnecting your tubing simple and convenient.
-
1 — AirTouch™ N30i Mask Frame (of selected size)
-
3 — AirTouch™ N30i Mask Cushions (Small Wide, Medium, and Large)
-
1 — Elbow
-
1 — Frame Sleeve
-
1 — QuietAir™ Vent
-
1 — AirTouch™ N30i Headgear
If you're looking to purchase the Resmed AirTouch™ N30i Nasal CPAP Mask components without a prescription, you can find them here.
Breathing Style:
-
Nasal Breathers
- Mouth Breathers (when paired with a CPAP mask chinstrap)
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
-
Active Sleepers
Additional Considerations:
-
High Pressure Settings
- Glasses Wearers
- Claustrophobia
- Facial Hair
-
Full Field of View for Reading or Watching TV Before Bed
-
Tossing and Turning During Sleep
Assembling Your Mask:
Refer to the assembly diagrams in these instructions.
- Connect the elbow into the top of the frame until it clicks.
- Insert each end of the headgear strap into the frame and fold the
fastening tabs backwards. Ensure that the Resmed logo is facing
outwards and is upright. - Align the tab (a) on the cushion with the notch (b) on the vent, and
then gently pull the cushion over the vent. - Insert the ends of the frame into the cushion, ensuring that the arrows
on the cushion and frame are aligned.
- Note: If the elbow ring detaches, re-insert into the top of the frame.
Fitting Your Mask:
Refer to the fitting diagrams in these instructions.
- Pull the frame and headgear over your head until the elbow is
positioned on top and the headgear is behind your head. - Place the cushion under your nose. For the AirFit P30i mask, align the pillows into your nostrils.
- Tighten or loosen the headgear until the cushion fits comfortably
under your nose. - Squeeze the side buttons on the elbow and detach from the frame.
Connect the air tubing from your device to the elbow, then reattach to
the frame.
Disassembling Your Mask:
Refer to the disassembly diagrams in these instructions.
- Pull the cushion from the frame.
- Gently peel the cushion away and slide the vent out.
- Undo the fastening tabs on the headgear strap and pull it from the
frame. - Squeeze the side buttons on the elbow and detach from the frame.
Note:
- The QuietAir or multi-hole vent can be removed to allow inspection of
the vent holes. - After detaching the headgear, close the fastening tabs to prevent it
from damaging the fabric sleeves when handling.
| Operating Therapy Pressure Range |
| 4 to 25 cm H²O |
CPAPsupplies.com: CPAP Supplies Replacement Schedule
AirTouch™ N30i: Sizing Guide
AirTouch™ N30i: Mask Fitting Guide
AirTouch™ N30i: Cleaning and Care
AirTouch™ N30i: Mask Seal and Comfort
- CPAP Mask Frame Replacement Frequency: Resupply Every 3 Months
- CPAP Mask Cushions/Pillows Replacement Frequency: Resupply Every 2 Weeks
- CPAP Mask Headgear Replacement Frequency: Resupply Every 6 Months
CPAPsupplies.com: CPAP Supplies Replacement Schedule
Cleaning Guide
Regularly cleaning your CPAP mask parts and components is crucial for avoiding the accumulation of bacteria, debris, oils, and other contaminants. This will help prevent the buildup of germs that may cause skin irritation and other unwanted side effects.
Before following the instructions below, first make sure your CPAP machine is unplugged from the power source, disconnect your mask and air tubing from your CPAP machine, and disassemble your mask components into 3 parts (nasal cushions, headgear, and frame):
| Part | Cleaning Frequency | Instructions |
|
Nasal Cushions |
Daily |
|
|
Mask Frame |
Weekly |
|
|
Headgear |
Weekly |
|
|
Chinstrap |
Weekly |
|
*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
You can find more useful information regarding CPAP cleaning with this blog:
| Brand | Resmed |
|---|---|
| SKU | p_AT-N30i-Starter-Pack |
| Model | p_AT-N30i-Starter-Pack |
| UPC | 619498623013, 619498623006 |
| Prescription Required | Yes |
| Weight | 0.37 lbs |
| Manufacturer's Warranty | 90-day limited manufacturer's warranty |
| FSA/HSA Eligible | Yes |
| Included | 62301, 62300 |
