Resmed AirTouch™ F40 Full Face CPAP Mask
$138.50
Resmed's AirTouch™ F40 CPAP Mask brings a softer feel to the F40 series full-face masks with a flexible fabric-fused silicone cushion that adapts to sleep movement to help maintain a secure seal during sleep apnea therapy. The ComfiSoft™ cushion incorporates a soft, breathable moisture-wicking fabric for optimal comfort and rests under your nose to reduce pressure and red marks on your nasal bridge, providing a minimal contact design and open line of sight.
Resmed AirTouch™ F40 Full Face CPAP Mask
Resmed’s AirTouch™ F40 is a full face tube-down CPAP mask that combines the softness of fabric with the performance and minimal-contact design of the AirFit™ F40.
The under-the-nose ComfiSoft™ cushion is designed with a moisture-wicking fabric to help keep your skin cool and reduce abrasion and skin irritation, while Resmed's AdaptiSeal™ technology allows the cushion to conform to unique facial contours to help create a secure mask seal for maximum comfort and performance.
Featuring QuietAir™ venting, the AirTouch™ F40 diffuses air as you exhale to help reduce the noise levels of your sleep apnea therapy for a more restful sleep for you and your sleep companion.
Remove or adjust your CPAP mask with ease with the F40’s adjustable headgear and magnetic clips.
Please note: AirTouch™ F40 Headgear does not automatically come with the order. If you'd like to purchase headgear with your CPAP mask, please select your option in the dropdown above.
Don't forget to add your AirTouch™ F40 Headgear above!
Magnetic Contraindications
Per Resmed, please note the following about this mask’s magnetic contraindications:
Update to Contraindication
In an update to the previously contraindicated metallic aneurysm hemostatic clips in the head and metallic splinters in one or both eyes following a penetrating eye injury, Resmed is further contraindicating the use of its masks with magnets for patients where they, or anyone in close physical contact while using the mask (e.g., bed partner), have the following:- Active medical implants that interact with magnets (i.e., pacemakers, implantable cardioverter defibrillators (ICD), neurostimulators, cerebrospinal fluid (CSF) shunts, insulin/infusion pumps)
- Metallic implants/objects containing ferromagnetic material (i.e., aneurysm clips/flow disruption devices, embolic coils, stents, valves, electrodes, implants to restore hearing or balance with implanted magnets, ocular implants, metallic splinters in the eye)
Update to Warning
The safe distance to the magnets has been increased from 2 inches (50 mm), and patients are now warned to keep the mask magnets at a safe distance of 6 inches (150 mm) away from implants or medical devices that may be adversely impacted by magnetic interference. This applies to patients, or anyone in close physical contact with the mask magnets.Note, not all models or manufactured variants of medical devices listed in the contraindications are affected by external magnetic fields. Only those that interact with magnets or contain ferromagnetic materials present the potential for magnetic interference.
For more information: please reach out to Resmed directly; CPAPsupplies.com does not have any additional details on this update. Visit www.resmed.com/magnetupdate for more details and the appropriate contact information.
- Minimal Contact, Maximum Comfort: The AirTouch™ F40 expands on the original tube-down, under-the-nose minimalist design of the AirFit™ F40 by incorporating an innovative fabric‑fused silicone cushion. With a soft, breathable, moisture‑wicking fabric designed to help make your sleep apnea therapy more comfortable.
- AdaptiSeal Technology: The AirTouch™ F40 soft, silicone cushion is flexible and is designed with Resmed's AdaptiSeal to adapt to patient movement during sleep to help maintain a secure seal. In an external clinical study, 78% of patients rated the seal as good or excellent.
- ComfiSoft Cushion: The ComfiSoft moisture-wicking fabric cushion is the key difference between the AirTouch™ F40 and AirFit™ F40 masks, allowing CPAP users to transition from one to the other without having to resize or refit them.
- UltraCompact Design: The AirTouch™ F40 cushion rests under your nose to avoid discomfort caused by pressure and red marks on your nasal bridge, which can be ideal for patients who prefer minimal facial coverage and a clear line of sight for reading or watching TV in bed before you sleep.
-
1 — AirTouch™ F40 Mask Frame (of selected size)
-
1 — F40 ComfiSoft™ Cushion (of selected size)
-
1 — QuietAir™ Elbow
Please note: AirTouch™ F40 Headgear does not automatically come with the order. If you'd like your purchase to include headgear, please select your headgear option above. If you select a headgear option, the following will be included:
-
1 — AirTouch™ F40 Headgear
-
2 — Magnetic Clips
Who is the AirTouch™ F40 Full Face Mask Ideal For?
Breathing Style:
-
Mouth Breathers
Sleeping Style:
-
Back Sleepers
-
Side Sleepers
Additional Considerations:
-
High pressure settings
-
Chronic allergies or nasal congestion
-
Sensitive skin
-
Breathable, moisture-wicking fabric at the seal to help keep skin cool
-
Quiet and diffused venting
-
CPAP users who wear glasses
-
Reading or watching TV in bed
Assembling Your AirTouch™ F40 Mask
1. Insert your cushion into the stud holes on both sides of the mask frame.
2. Align the ring groove of the vent with the opening of your cushion and press firmly to
secure in place and ensure that the cushion opening sits into the vent
ring groove.3. Connect the mask elbow to the vent ring.
4. With dark grey fabric side facing inwards, insert both upper headgear
straps into the frame from the inside and fold the fastening tabs over
to secure.
Fitting Your AirTouch™ F40 Mask
Remove all packaging before using the mask.
1. Twist and pull both magnetic clips away from the frame magnets.
2. Place the cushion under your nose and ensure it sits comfortably
against your face. With the ResMed logo on the headgear facing out,
pull the headgear over your head. The top headgear strap should sit on
top of your head and not too far forward or back.3. Bring the lower headgear straps under your ears and attach the
magnetic clips to the frame.4. If the mask needs adjusting, undo the fastening tabs on the upper
headgear straps and pull evenly. Repeat with the lower headgear
straps.Adjusting your mask
• With the device turned on and blowing air, adjust the position of the
cushion for the most comfortable fit under your nose. Ensure that the
cushion is not creased and the headgear is not twisted.• The top headgear strap should sit on top of your head and not too far
forward or back. Reposition the strap if needed to ensure the cushion
has a good seal under the nose.• To fix any leaks around the nose, pull the cushion slightly away from
the face and reposition the cushion so that it sits comfortably under
the nose. Adjust the upper headgear straps, if required.• To fix any leaks around the mouth, adjust lower headgear straps.
Adjust only enough for a comfortable seal and do not overtighten.• If you continue to have leaks around the face, you may have the
wrong mask size. Talk to your clinician to have your mask size
checked. Note that sizing across different masks is not always the
same.
Disassembling Your AirTouch™ F40 Mask
If your mask is connected to a device, disconnect the device air tubing from the short tube.
1. Undo the fastening tabs on the upper headgear straps and pull from
the frame.Tip: Keep the magnetic clips attached to the lower headgear straps to
easily distinguish the upper and lower straps when reassembling.2. Squeeze the side buttons on the elbow and detach from the vent ring.
3. Pull the cushion stud out of the frame stud hole, repeat on the other
side.4. Pull the vent ring from the cushion.
AirTouch™ F40 Fitting Guide Video
AirTouch™ F40 Find Your Mask Video
AirTouch™ F40 Cleaning & Care Video
AirTouch™ F40 Mask Seal & Comfort Video
AirTouch™ F40 Vent Removal & Replacement Video
CPAP Supplies Replacement Schedule
Operating Therapy Pressure Range:
4 to 30 cm H²O
Find Your Replacement Parts Here!
To keep your AirTouch™ F40 in good working order, and your sleep therapy effective, it’s important to replace individual parts when lost or worn out. You can individually purchase the AirTouch™ F40 cushion, the F40 headgear with clips all without a prescription.
AirTouch™ F40 Replacement Parts:
This replacement CPAP mask assembly for the AirTouch™ F40 Full Face Mask includes one AirTouch™ F40 frame replacement and one replacement AirTouch™ F40 cushion replacement of your selected size. AirTouch™ F40 replacement headgear is not included unless selected above.
When To Replace AirTouch™ F40 Frame?
- Resupply Every 3 Months
When To Replace AirTouch™ F40 Cushion?
- Resupply Every 30 Days
When To Replace AirTouch™ F40 Headgear?
- Resupply Every 6 Months
CPAPsupplies.com: CPAP Supplies Replacement Schedule Video
Why Replace Your CPAP Mask Parts?
Replacing your CPAP parts:
-
Helps to prevent air leaks, bacterial growth, mask fit instability, and more.
-
Helps improve mask seal, sleep comfort, hygiene, and overall sleep therapy effectiveness.
-
Cleaning Guide
Why Clean Your CPAP Supplies?
If visible deterioration of any CPAP mask components is detected,
you should discard and replace itto reduce the risk of exposure
to harmful bacterial buildup and residue.Daily/After each use: -
Cushion, elbow and short tube, vent ring
Weekly: -
Headgear, frame
1. Soak your CPAP parts in warm water, using a mild detergent*.
Ensure that no air bubbles are present while soaking.2. Give mask parts an assertive shake while in the water and hand wash
each part, except the ComfiSoft cushion, with a soft bristle brush.
The vent holes in the QuietAir/Multi-hole vent ring may require
extra attention to clean properly.3. Rinse each component thoroughly under running water.
4. Squeeze all fabric parts to remove any excess water.
5. Leave your mask parts out to air dry, away from direct sunlight.
Make sure that the QuietAir vents and anti-asphyxia valves are clear and visibly clean.*Avoid using strong detergents or soaps, especially those that contain harsh chemicals, perfumes, dyes, moisturizers, or alcohol.
-
Tubing Compatible with AirTouch™ F40:
CPAP Machines Compatible with AirTouch™ F40:
You May Also Like:
| SKU | pb_AT-F40 |
|---|---|
| Model | pb_AT-F40 |
| UPC | 619498647071, 619498647088, 619498647095, 619498646333, 619498646340, 619498646357 |
| Prescription Required | No |
| Manufacturer's Warranty | 90-day limited manufacturer's warranty |
| FSA/HSA Eligible | Yes |
| Dimensions | Small/Wide: 8" (L) x 6" (W) x 3.5" (H) | Medium: 14" (L) x 10" (W) x 4" (H) | Large: 8" (L) x 8" (W) x 3" (H) |
| Included | 64707, 64708, 64709, 64633, 64634, 64635 |
