CozyHoze BOSS™ CPAP Tube Hanger

Discover how Pur-Sleep's CozyHoze BOSS™ CPAP Tube Hanger can help you get a better CPAP therapy experience. Using a convenient, easy to install wall-mounted suspension system you can hook your CPAP tubing to the wall and out of your way. This can help reduce pulling against your mask and machine, minimize mask leaks and condensation build-up in your tube, and allows for a full range of movement for a variety of sleep positions.

The CozyHose BOSS™ utilizes a wall mounting hook with a spring loaded/self-retracting reel that can be easily removed from the wall. You can detach and reattach the hook base on the wall and reposition it to a different location without difficulty.

Installation Instructions:

• Hook wall mount approximately 22-28 inches above your pillow and 6 inches off-center from the middle of the bed.

• Apply alcohol prep wipe to clean surface and allow to dry.

• Removing the backing from the adhesive strip, apply to the base of the mounted hook (with pull-tab extending below the narrow end of the hook base and the wide part of the hook base pointing upward). Allow a few minutes for the adhesive to set.

• Remove black cover from CommandAdhesive strip and place on cleaned surface with narrow end of hook base extending downward. Allow adhesive to set for approx. 20 mins.

• Attach loop from Reel #1 (closest to center of bed) around hose about 18-24 inches from the mask connection.

• Attach Reel #2 to the hose so slack hose will feed Reel #1 (Reel #2 should be connected further away for lighter masks and closer for heavier masks).

• The reels are designed to provide light tension and in general shouldn't be fully retracted when in use.

• For traveling, simply remove the CommandAdhesive strip by holding the hook and pulling straight down on the tab. The reels will retract automatically. Reinstall the reel hooks upon arrival.

Related Products:

• SnuggleHose CPAP Tubing Wrap

• Universal 6ft CPAP Tubing 22mm